Advanced Plastics And Design

09-263 7741

slide2 slide test-slide

StormLite Detention / Retention Tanks

StormLite Detention / Retention Tanks

STORMWATER-DETENTION-TANKS-1

Our design keeps the tank outlet level with the tank invert and tank overflow level with the crown, giving you maximum volume.  100% of the tank is used while still meeting council regulations.

Made to order, delivery is normally within a week or less.

Easy installation – supplied complete ready to install.

A Silt Trap replaces the separate chamber that might otherwise be required.

Where storm water retention is called for, it doubles as a pump sump. See our Rain Harvesting Systems.

Volume customised for your site – 1m3 to 30m3 (1,000 to 30,000 Litres). Each tank is made to order to the volume specified by council.  You don’t pay for, or install  more tank than you require. Available in 4 diameters – 645mm, 800mm, 1000mm and 1200mm.

Lengths are calculated to provide specific volume from 1 metre.

Tough Eco Friendly polyethylene (PE), never rots or corrodes and is easy to handle.

Fittings are supplied – including seals, outlet end cap to drill orifice in and leaf trap/screen.

Access included – all tanks are supplied with 600mm diameter man way riser.

Plastic Lids available – suitable for garden & lawn areas.

Standard cast-iron, or ductile-iron manhole covers to be used in traffic or driveway areas.

For more info: StormLite Product Guide 2016

Rectangular Detention  / Retention / Rainwater Tanks

Rectangular stormwater detention tanks are available from APD for those projects where standard stormwater detention tanks just won’t work. Great for under houses and decks these tanks can be custom made to fit between piles and structural supports. Installed in this situation no ground excavation is required other than levelling the area where the tank is to be sited.

Designed and fabricated for you, APD rectangular stormwater detention tanks are manufactured to meet project requirements.  Standard modular rectangular tanks are also available starting at 500 Litres, 1000 Litres and then increasing in 1000 Litre steps.

Made from robust black polyethylene (PE) rectangular stormwater detention tanks are lightweight for their size, making handling on site during installation easy. Rectangular stormwater tanks are reinforced with internal structural support baffles or external supports to handle projected loadings.

All our standard fittings for stormwater connections such as inlet, outlet and overflow are compatible with the rectangular stormwater detention tanks and a complete kitset of fittings is supplied with each tank. Alternatively APD will fabricate connection spigots to your requirements. Call APD today to discuss your requirements.

Rectangular DT 4200 x 1500 x 600mmRectangular DT 3000 x 1500 x 450mm600 x 1750 x 3600 Rectangular Tank